Car Steering Column Mount Universal Adapter(0)
Our popular vehicle mount fits the majority of vehicles out there. But, there are some that have no gap, a covered gap, or very thick gap-edge beneath the steering column. There are also some that have an awkward column design such as older antique/classic cars. If you have any doubts about our vehicle mount fitting your vehicle, this adapter is for you.
This adapter will provide you with a safe alternative of installing your vehicle mount to your steering wheel column. The adapter allows customers in this situation to still use the vehicle mount as it was intended. It simply bypasses the steering wheel gap attachment point and allows you to adjust the vertical height/location of where your holster and mount are positioned under the steering column.
Simply wrap the adapter around the entire steering column, buckle on top, and pull tight. A thin metal ring on the bottom of the adapter strap provides a loop to hook the top part of our Vehicle Mount as if it were the typical gap beneath the steering column. Same function, same location, unobtrusive, problem solved.
This adapter is intended to be used with the Vehicle Handgun Mount (GCC-UVHHM).
Write a review below:
(if you have a product related question email us at firstname.lastname@example.org)
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: